Maintenance
Phaser 6000/6010 Color Printer
User Guide
25
6. In the Notification Items section, select the events for which you would like to be notified.
7. In the Connection Setup box, click the Email Settings link.
The Email Settings page opens.
8. In the Email Server Setup (Required to send Email) section, do the following:
a. In the Return Email Address field, type the return address used by the email server.
b. In the SMTP Server (IP Address or DNS Name) field, type the IP address, or DNS name, used by
your SMTP server for sending email.
Notes:
• If you are unsure of the address or DNS name, contact your Internet Service Provider (ISP) for
the correct address information.
• If you are using a DNS name for the SMTP or POP3 server, you must configure the DNS server.
Use the DNS section of the TCP/IP settings in CentreWare Internet Services to configure the DNS
server information.
c. In the SMTP Port field, type the number of the port used by the SMPT server. The default is 25.
9. In the Email Send Authentication section, do one of the following:
• If no authentication is necessary, select No Authentication in the Authentication Type field.
• If authentication is required, complete the fields as needed.
10. Click the Save Changes button.
11. In the navigation pane on the left side of the page, click Port Enabling and then select the check
boxes for the ports to enable. Be sure to enable at least the Enable Mail Alerts port.
12. Click the Save Changes button.
To Next Page
Loading...
Need help?
General