Xerox Phaser 6020 - Power Saver Mode

Features
Xerox
®
Phaser
®
6020 Printer 23
User Guide
Power Saver Mode
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
There are two levels of Power Saver mode.
• Mode 1 (Low Power): The printer shifts from Ready mode to Low Power mode to reduce standby
power consumption.
• Mode 2 (Sleep): The printer shifts from Low Power mode to Sleep mode for a greater reduction in
power consumption.
Changing Power Saver Mode Settings Using Windows
To change the Power Saver mode settings:
1. Launch the Printer Setting Utility, then select the Printer Maintenance tab.
2. For Mode 1 and Mode 2, select the number of minutes.
Exiting Power Saver Mode
The printer exits Power Saver mode automatically when it receives data from a connected device.
To exit Power Saver mode manually, on the control panel, press the Power Saver button.