Xerox Phaser 6020 - Refreshing the Toner; Cleaning the Developer

Maintenance
82 Xerox
®
Phaser
®
6020 Printer
User Guide
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with high
or low ink coverage, Toner Refresh can optimize print quality.
To refresh the toner:
1. Launch the Printer Setting Utility, then select the Diagnosis tab.
2. Click Refresh Mode.
3. Click a toner cartridge.
Cleaning the Developer
The Clean Developer feature runs the developer motor and mixes the toner in the developer. Use the
Clean Developer feature to refresh the toner after replacing a toner cartridge or if dark streaks are
appearing in your prints.
To clean the developer:
1. Launch the Printer Setting Utility and select the Diagnosis tab.
2. Click Clean Developer.
3. Click Start.