Xerox Phaser 6020 - Connecting to Wi-Fi Direct

Installation and Setup
Xerox
®
Phaser
®
6020 Printer 33
User Guide
Connecting to Wi-Fi Direct
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,
using Wi-Fi Direct.
Note: Wi-Fi Direct is disabled by default.
Connecting with Wi-Fi Direct from Your Computer
Before you can use Wi-Fi Direct, ensure that the printer is connected to a computer using USB or a
wireless network. See Connecting the Printer on page 30.
To connect your printer with Wi-Fi Direct from your computer:
1. Launch the Printer Setting Utility, then select the Printer Maintenance tab.
2. Click Wireless Setup.
3. For Wi-Fi Direct Setup, click Enable.
4. Select your mobile device to connect.
5. On your mobile device, accept the invitation to connect.
Connecting with Wi-Fi Direct from Your Mobile Device
To connect with Wi-Fi Direct, follow the directions provided with your mobile device.