Xerox Phaser 6020 User Manual

Installation and Setup
48 Xerox
®
Phaser
®
6020 Printer
User Guide
Installing the Printer as a Web Services Device
Web Services on Devices (WSD) allow a client to discover and access a remote device and its associated
services across a network. WSD supports device discovery, control, and use.
To install a WSD printer using the Add Printer Wizard:
1. At your computer, access the Add Printer Wizard.
− For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
− For Windows Server 2003 and later, click Start > Settings > Printers.
− For Windows 7, click Start > Devices and Printers.
− For Windows 8, click Control Panel > Devices and Printers.
2. To launch the Add Printer Wizard, click Add a Printer.
3. In the list of available devices, select the one you want to use, then click Next.
4. If the printer that you want does not appear in the list, click The printer that I want is not listed.
a. Select Add a printer using a TCP/IP address or hostname, then click Next.
b. For the Device type field, select Web Services Device.
c. Enter the printer IP address in the Hostname or IP address field, then click Next.
5. Complete the steps in the wizard, then click Finish.

Xerox Phaser 6020 Specifications

General

Brand	Xerox
Model	Phaser 6020
Category	Printer
Language	English