Xerox Phaser 6020 - Page 44

Installation and Setup
44 Xerox
®
Phaser
®
6020 Printer
User Guide
7. For the action the host takes with the IP address, for Active mode, select an option.
− Off: You can use this setting to make a row of the access list inactive. Use this setting to enter a
specific IP address or range of addresses before you apply Accept or Reject mode.
− Accept: You can use this setting to allow the specified IP address or range of addresses access
to the printer.
− Reject: You can use this setting to deny the specified IP address or range of addresses access
to the printer.
8. Click Save Changes.