Maintenance
88 Xerox
®
Phaser
®
6020 Printer
User Guide
7. Lift and carry the printer as shown in the illustration.
Note: To find the weight for your printer configuration, see Physical Specifications on page 111.
CAUTIONS:
• Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee.
The Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
damage to the printer caused by improper moving.
• When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or
right. Tilting the printer more than 10 degrees can cause toner spillage.
After moving the printer:
1. Reinstall any parts you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
To Next Page
Loading...
