Поиск и устр. неиспр.
132 Phaser 6700 Color Printer
Руководство пользователя
Unsupported paper of the wrong size,
thickness, or type.
Use only Xerox
®
-approved paper. For details, see Supported Paper
на стр. 36.
The label sheet is facing the wrong way in the
tray.
• Load label sheets according to the instructions from the
manufacturer.
• Load labels face down in Tray ??????????
• Load labels face up in Tray ???????.
Envelopes are loaded incorrectly in Tray 1. Load the envelopes in Tray 1 with the flaps closed, flap-side up, and
the short edge leading into the printer.
Envelopes are loaded incorrectly in Trays 2–6. To load envelopes in Trays 2–6:
• Load #10, Monarch, or DL envelopes with the flaps closed, flaps
down, and flaps on the leading edge, toward the left.
• Load C5 envelopes with the flap closed, flap down, and flap
toward the right.
Label and Envelope Misfeeds
Probable Causes Solutions
The label sheet is facing the wrong way in the tray. Load label sheets according to the instructions from the
manufacturer.
• Load labels face down in Tray 1.
• Load labels face up in Tray 2.
Envelopes are loaded incorrectly in Tray 1. Load the envelopes in Tray 1 with the flaps closed,
flap-side up, and the short edge leading into the printer.
Envelopes are loaded incorrectly in Trays 2. To load envelopes in Tray 2:
• Load #10, Monarch, or DL envelopes with the flaps
closed, flaps down, and flaps on the leading edge,
toward the left.
• Load C5 envelopes with the flap closed, flap down,
and flap toward the right.
Paper Jam Message Stays On
Возможные причины Решения
Часть застрявшей бумаги осталась в
принтере.
Еще раз проверьте тракт прохождения бумаги и убедитесь, что
вся застрявшая бумага вытащена.
Открыта одна из дверец принтера. Проверьте дверцы принтера. Закройте все открытые дверцы.
Примечание. Check for, and remove, torn pieces of paper in the paper path.