Xerox Phaser 860 - Loading the Optional High-Capacity Paper Tray

User Guide
19
Loading Trays
Loading the Optional High-Capacity Paper Tray
The optional high-capacity paper tray assembly is located under the
base printer. You can have one or two high-capacity paper tray
assemblies. The trays are then called the Middle Tray and Lower Tray
in the printer driver software.
Note
Do NOT load transparencies in a high-capacity tray.
You can refer to the labels inside the tray for paper-loading
instructions.
1. Pull out and completely remove the tray.
2. If there is any paper remaining in the tray, remove it.
Note
Do not re-use the remaining paper in a high-capacity paper
tray. If that paper is not damaged, it may be used in the
standard paper tray (upper tray).
3. Open a new ream of paper. Remove any bent or torn sheets of
paper from the ream.
0726-12