PLANNING YOUR FORMS
Suggested uses
You can use the design ruler for character spacing or line
spacing. For example, you can use scale 1 for 10 characters per
inch (cpi) or 10 lines per inch (lpi). Typically, you use side 1 of
the ruler for measuring impact–printed computer output reports
in which the character spacing is 10 cpi (scale 1) and line spacing
is 6 lpi (scale 2) or 8 lpi (scale 3). You use side 2 for measuring
LPS output.
The default spacing for the LPS is 13.6 cpi (scale 5) and 8.1 lpi
(scale 6). These defaults allow optimal readability for the
standard format of 132 columns by 66 lines.
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS 2–13
To Next Page
Loading...
Need help?
General