Xerox Printer User Manual

USING HFDL COMMANDS
Examples Long form:
GRAPHIC SYMBOL AT 1,1 SCALE IS 4 USING INK 3;
There is no short form.
SECTION command
Use the SECTION command when a form consists of identical
blocks of commands. You can save time by defining one section
and then repeating it at the locations you want.
You can also use this command to define an entire form as a
section. Within the section, you can use any other command,
statement, or specification except another SECTION command,
DO SECTION command, FORM command, or END command.
Figure 3–19 shows the SECTION command syntax flow.
Figure 3–19. SECTION command syntax
LINE COMMAND SECTION
name ;SECTION
;
BEGIN
TEXT AT COMMAND
TEXT IN BOX COMMAND
LOGO COMMAND
GRID COMMAND
BOX COMMAND
INTERWORD COMMAND
DOT LEADER COMMAND
COLUMN COMMAND
LET COMMAND
GRAPHIC COMMAND
END
ENDSECTION
Parameter name specifies the name of the SECTION you want to use to
invoke the SECTION command. You may define and invoke
more than one section, but you must terminate each section with
the command END SECTION or ENDSECTION before you define
another section. Do not use a reserved word or keyword as a
section name.
name is a maximum 16-character string.
Default None.
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS 3–27

Xerox Printer Specifications

General

Brand	Xerox
Model	Printer
Category	Printer
Language	English