Paper and Media
Xerox
®
VersaLink
®
C400 Color Printer 107
User Guide
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray. Load hole-punched paper with the holes to the left.
− For 1-sided printing, load letterhead or pre-printed paper face up with the top edge going into
the printer.
− For 2-sided printing, load letterhead and pre-printed paper face down with the top edge going
into the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer
to jam.
To Next Page
Loading...
