Xerox VersaLink C400V User Manual

Maintenance
Xerox
®
VersaLink
®
C400 Color Printer 137
User Guide
Moving the Printer
WARNINGS:
• To lift the printer, always use at least two people to grasp the hand holds on each
side of the printer.
• To prevent you from dropping the printer or injury, lift the printer firmly by gripping
the recessed areas on both sides of the printer. Never lift the printer by gripping any
other areas.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer.
If the optional 550-Sheet Feeder is not fixed to the printer securely, it can fall to the
ground and cause injury.
Follow these instructions when moving the printer:
1. Power off the printer, then disconnect the power cord and other cables from the back of the printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands.
When removing the power cord, ensure that you pull the plug and not the cord.
Pulling the cord can damage it, which can lead to fire or electric shock.
2. Remove any paper or other media from the output tray. If the output tray extension is extended,
close it.
3. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.

Xerox VersaLink C400V Specifications

General

Brand	Xerox
Model	VersaLink C400V
Category	Printer
Language	English