3. Move the width guides to the edges of the tray.
4. Load sheet-labels in the Bypass Tray, face up, with the top edge of the page feeding into the
printer first.
5. Adjust the width guides until they touch the edges of the paper.
6. The printer prompts you to verify the type, size and color of the label sheets.
a. If the type, size and color are correct, touch OK.
b. If the type, size or color are incorrect, change the settings.
• To select the type, touch the current paper type, then from the list, select Labels.
• To select a size, touch the current size setting, then from the list, select a size.
• To select the color, touch the current paper color, then from the list, select a color.
c. To save the settings, touchOK.
122
Xerox
®
VersaLink
®
C600 Color Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General