Appendix
WorkCentre 5019/5021
User Guide
12-9
2-sided printing
When performing 2-sided printing with the machine that the duplex output unit is not installed, it
prints only one side. In this case, the orientation of prints may not be the same as expected.
Error codes
The error "E-1" occurs besides a paper jam when the paper size setting is not correctly specified. Refer
to the Error Code "C-7" and check paper size setting. Refer to Error codes on page 11-21.
Notes and restrictions on the use of the Scan feature
This section describes notes and restrictions to observe when using the Scan feature.
For the notes and restrictions on the scan driver, see the "Readme" information on the CD-ROM for the
Driver CD Kit that came with the machine.
Restriction on scanning capacity
The maximum scanning capacity for one page is 297 × 432 mm. For standard sizes, A3 or 11 × 17
inches.
To Next Page
Loading...
Need help?
General
