Copy
WorkCentre 5019/5021
User Guide
5-5
Setting advanced settings
Notes
• The settings displayed may vary according to model.
• You may need to enter a password to use the copy feature. Ask your system
administrator for the password.
For more information on advanced settings, refer to Advanced copy settings on page 5-9.
For more information on entering a password, refer to Entering System Administration mode on
page 8-2.
Entering the number of copies
You can enter a value between 1 and 999 for the number of copies.
1. Use the numeric keypad to enter the desired number of copies.
The entered value appears in the machine status diagram.
To Next Page
Loading...
Need help?
General
