Copy
WorkCentre 5019/5021
User Guide
5-13
Magnification table
When you make enlarged or reduced copies from standard size documents on standard size paper, the
following copy ratios will apply.
Original size
You can set the document size and orientation.
After placing the document on the document glass, make sure to set the size and orientation of the
document.
Note If the document size is larger than the original size, the image may be cut off. Make sure to
choose an appropriate document size.
Press the Original Size button to select a document size.
In the machine status diagram, the selected document size and the orientation are displayed on the
original size display.
Fixed document size (preset)
You can set the document size of the placed document by selecting from the preset document sizes.
The document size and orientation change everytime the Original Size button is pressed.
Copy /
documents
A5 B5 A4 B4 A3
A5 100% 122% 141% 174% 200%
B5 81% 100% 115% 141% 163%
A4 70% 86% 100% 122% 141%
B4 58% 70% 81% 100% 115%
A3 50% 61% 70% 86% 100%
To Next Page
Loading...
Need help?
General
