Product overview
WorkCentre 5019/5021
User Guide
3-17
For information on how to select an account mode in the system settings, refer to Account mode
settings on page 8-8.
1. Enter a password using the numeric keypad.
Note The password is the same as the system administrator’s password used for entering System
Administration mode from the control panel. For information, refer to Entering System
Administration mode on page 8-2.
For security reasons, as you enter each digit of the password, a hyphen appears in the display instead
of the actual number you entered.
2. Press the Start button to confirm the entered password.
To Next Page
Loading...
Need help?
General
