Internet Services
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
26
2. Click on the [Protocols] link.
Note: To see IPv6 Addressing parameters, if desired, click [IP (Internet Protocol)] in the list of
Protocols, then click on [IPv6] tab.
3. Select your individual protocol of interest from the displayed list and modify settings to your
requirements. For further information refer to Network Installation on page 69.
Set a Description for the Device
The Internet Services Properties Description page contains information that identifies a specific
device model, name and physical location.
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, select [Description] in the directory tree.
2. In the Identification area:
a. Type a name of your choice for the device in the [Device Name] field.
b. Type the site location for the device in the [Location] field.
c. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
To Enable Services
Services are pre-installed on the device, and must be enabled from the Optional Services screen within
the device Tools pathway.
The Optional Services are:
At the Device:
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.
1. From the Tools pathway, touch [Service Settings].
2. Use the Up and Down scroll button and touch [Optional Services].
Note: If you do not see the required service, you may need to install additional hardware on your
device.
• ID Card Copy • Immediate Image Overwrite
• Workflow Scanning • Server Fax
• E-mail • Embedded Fax
• Internet Fax • Save Job For Reprint
• Image Overwrite Security • Searchable File Formats
•Network Accounting •Smart Card
• Color Scanner Enablement
To Next Page
Loading...
