Maintenance
Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer 211
User Guide
4. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.
5. When lifting the printer, grasp the areas as shown.
Notes:
• When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or right.
Tilting the printer more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the imaging units and toner cartridges
to prevent toner from spilling. Repack the printer and its options using the original packing
material and boxes or a Xerox Repackaging Kit. For a repacking kit and instructions, go to
www.xerox.com/office/WC6655support.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not covered
by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.
To Next Page
Loading...
Need help?
General
