Installation and Setup
44 Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
Modifying General Settings
You can modify printer settings such as the language, date and time, units of measurement, display
brightness, and startup page from the control panel.
Note: If these settings do not appear, contact the system administrator or log in as a system
administrator. For details see Logging In as the System Administrator at the Control Panel on page
28.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > General, then touch the setting you want to change:
− Energy Saver: This option specifies when the printer goes into energy-saving mode.
− Date and Time: This option allows you to set the time zone, date, time, and display format.
− Language/Keyboard Selection: This option allows you to set the language and keyboard
layout.
− Custom Keyboard Button: This option allows you to assign text to the custom key on the
virtual keyboard.
3. Touch OK.
To Next Page
Loading...
Need help?
General
