How to correct washout effect on Xerox All in One Printer?
To correct a washout effect on your Xerox All in One Printer, begin by checking the quality of the documents. If the image appears lighter near the borders, select a darker image quality setting on the touch screen. If the issue continues, consider replacing the drum cartridge.
How to prevent deformed transparencies with Xerox All in One Printer?
To prevent deformed transparencies when using your Xerox All in One Printer, ensure that [Transparency] is selected in [Paper Type]. This setting allows the machine to automatically adjust for different media types, as transparencies tolerate less heat than paper.
Why is the Finisher/Stapler option missing on my Xerox All in One Printer?
If the Finisher/Stapler option is not displayed on your Xerox All in One Printer, check that the cables from the finisher are securely connected to the machine. Also, ensure that the Finisher is correctly positioned. The machine automatically configures itself when additional options are attached.
How to resolve solid density variations on Xerox All in One Printer?
To resolve solid density variations on your Xerox All in One Printer, start by checking the quality of the documents. If necessary, select [Lighten/Darken] on the touch screen to adjust the density. If the issue persists, consider replacing the drum cartridge.
How to eliminate ghosting effect on Xerox All in One Printer?
To address ghosting issues on your Xerox All in One Printer, check the quality of the documents. If you're using transparencies, select [Transparency] in [Paper Type] to allow the machine to adjust the quality automatically. Ensure you feed the document SEF (Short Edge Feed). If the problem persists, replace the drum cartridge.
Why Xerox All in One Printer doesn't show paper tray?
If your Xerox All in One Printer does not display the Tandem Tray Module (or one of the paper trays) as a Paper Supply selection, ensure that all paper trays are fully closed. An ajar tray can prevent the machine from sensing its connection. Open and close each paper tray and the Tandem Tray Module. If the issue persists, power the machine off and then on again.
How to fix missing characters on Xerox All in One Printer output?
If your Xerox All in One Printer output is missing characters, try loading fresh paper. If that doesn't resolve the issue, reinstall the drum cartridge. If the problem continues, replace the toner cartridge, especially if the screen displays a replacement message.
Why are images blurred on my Xerox All in One Printer?
If you're experiencing blurred images with your Xerox All in One Printer, try loading fresh paper. If the problem persists, replace the drum cartridge, and if the screen prompts, replace the toner cartridge.
How to fix uneven print quality on Xerox All in One Printer?
To fix uneven print quality on your Xerox All in One Printer, try replacing the drum cartridge. If the screen displays a message for replacement, replace the toner cartridge as well.
How to resolve a tray fault on Xerox All in One Printer?
To resolve a tray fault on your Xerox All in One Printer: 1. Open the paper tray. 2. Move the paper tray guides away from the paper. 3. Move the paper tray guides against the paper so that they are just touching the paper. 4. Power the machine off and then on.
General| Printing Technology | Laser |
|---|---|
| Max Printing Resolution (B/W) | 600 x 600 dpi |
| Print Resolution | 600 x 600 dpi |
| Max Copying Resolution (B/W) | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Weight | 178.6 lbs |
| Functions | Copier, Fax, Printer, Scanner |
| Supported Media Type | Plain, Label, Envelope, Transparency |
| Interface | USB, Parallel |
| Connectivity | USB, Parallel |
| Supported Operating Systems | Windows |
To Next Page
