Replacing the Drum Cartridge
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 303
2. Open the bypass tray, and then
open Cover A while lifting up the
release lever.
3. Lift up the colored lever, and
slide the drum cartridge out until
you can lift the handle on top of
the cartridge.
4. Hold the handle and remove the
cartridge from the machine.
NOTE: When replacing the drum cartridge, make sure that the new cartridge is the
correct one specified for the machine.
Recycling the Drum Cartridge
The drum cartridge is designed to be re-manufactured. To recycle used drum
cartridges, return them to Xerox in the original packaging. Return labels are included
with each new cartridge.
To Next Page
Loading...
Need help?
General
