xFusion Digital Technologies FusionServer 1288H V7

Configuration Front Drive Rear Drive Drive
Management
Mode
For details about the optional components, consult the local sales representative or
see "OS and Parts Compatibility" in the Compatibility Checker.
Drive Numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the FusionServer 1288H V7 Server Maintenance and Service Guide.
● Drive numbers of the 4 x 3.5" drive pass-through configuration 1 in Table 5-7.
Figure 5-18 Drive numbering
Table 5-8 Drive numbering
Drive Number
Drive Number Displayed on the
iBMC WebUI
0 0
1 1
2 2
3 3
● Drive numbers of the 4 x 3.5" drive pass-through configuration 2 in Table 5-7.
Figure 5-19 Drive numbering
FusionServer 1288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 30