Activity
Indicator
(Green)
Fault Indicator
(Red/Blue)
Description
Steady on/
blinking
Blinking blue at 4
Hz
The NVMe drive is being located.
Blinking at 1 Hz Blinking red at 1
Hz synchronously
Data on the NVMe secondary drive is
being rebuilt.
Steady on/Off Red steady on The NVMe drive is faulty.
● If the VMD function is disabled, the NVMe drives support only orderly hot swap.
Table 5-21 NVMe drive indicator description (VMD function disabled)
Activity
Indicator
(Green)
Fault Indicator
(Red/Blue)
Description
Off Off The NVMe drive is not detected.
Steady on Off The NVMe drive is detected and
operating properly.
Blinking at 4 Hz Off Data is being read from or written to
the NVMe drive.
Steady on/
blinking
Blinking blue at 4
Hz
The NVMe drive is being located.
Off Blinking red at
0.5 Hz
The NVMe drive has completed the
hot swap process and is removable.
Off Blinking red at 2
Hz
The NVMe drive is being hot-
swapped.
Steady on/Off Red steady on The NVMe drive is faulty.
5.5.3 RAID Controller Card
The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.
● For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the Compatibility Checker.
● For details about the RAID controller card, see the V7 Server RAID Controller
Card User Guide.
5.6 Network
FusionServer 1288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 40
To Next Page
Loading...
