xFusion Digital Technologies FusionServer 1288H V7

5.2.1 Appearance
Figure 5-10 Rear view
1 I/O module 1 2 I/O module 2
3 PSU 1 4 PSU 2
5 (Optional) FlexIO card 2
NOTE
The FlexIO card slot supports
only OCP 3.0 NICs.
6 (Optional) FlexIO card 1
NOTE
The FlexIO card slot supports
only OCP 3.0 NICs.
NO TE
● I/O module 1 supports a PCIe riser module or rear drive module.
● I/O module 2 supports only the PCIe riser module.
● For details about the OCP 3.0 NIC, see 5.6.1 OCP 3.0 NICs.
● The figure is for reference only. The actual configuration may vary.
5.2.2 Indicators and Buttons
Indicator Positions
Figure 5-11 Indicators on the rear panel
1
Data transmission status
indicator of the
management network port
2 Connection status indicator
of the management
network port
FusionServer 1288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 17