xFusion Digital Technologies FusionServer 1288H V7

NO TE
● When a single fan is faulty, the highest operating temperature is 5°C (41°F) lower than the
rated value.
● When a single fan is faulty, the system performance may be affected.
● It is recommended that servers be deployed at an interval of 1U to reduce server noise and
improve server energy efficiency.
● Liquid-cooled processors are not supported.
● Rear GPU cards are not supported for the 4 x 3.5" drive pass-through configuration.
● Rear HDDs are not supported.
A.4 Nameplate
Certified Model
Remarks
H12H-07 Global
A.5 RAS Features
The server supports a variety of Reliability, Availability, and Serviceability (RAS)
features. You can configure these features for better performance.
For details about RAS features, see the FusionServer Sapphire Rapids Platform
Server RAS Feature Technical White Paper.
A.6 Sensor List
Sensor
Description Component
Inlet Temp Air inlet temperature Indicator board
Outlet Temp Air outlet temperature BMC card
PCH Temp PCH bridge temperature Mainboard
PCH Status PCH chip fault diagnosis
health status
Mainboard
1711 Core Temp Core temperature of the
BMC management chip
BMC card
SSD Max Temp Maximum SSD
temperature (reported by
BMA)
SSD
CPUN Core Temp CPU core temperature CPUN
N indicates the CPU
number. The value is 1 or
2.
FusionServer 1288H V7 Server
Technical White Paper A Appendix
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 83