xFusion Digital Technologies FusionServer 1288H V7 - Page 62

Component Specifications
Network OCP 3.0 NICs provide network expansion capabilities.
● Supports two OCP 3.0 NICs, which can be configured
as required.
● Supports orderly hot swap.
NOTE
The OCP 3.0 NIC supports orderly hot swap only when the
VMD function is disabled.
● Supports a variety of OCP 3.0 NICs. For details, see
"Search Parts" in the Compatibility Checker.
I/O expansion
Supports five PCIe slots.
● Supports two PCIe slots dedicated for OCP 3.0 NICs
and three standard PCIe slots.
For details, see 5.7.2 PCIe Slots and 5.7.3 PCIe Slot
Description.
NOTE
The preceding information is for reference only. For details, see
"Search Parts" in the Compatibility Checker.
Ports
Supports a variety of ports.
● Ports on the front panel:
– One USB Type-C iBMC direct connect
management port
– Two USB 3.0 ports
– One DB15 VGA port
NOTE
The front panel of 10 x 2.5" drives provides only one USB
Type-C iBMC direct connect management port and one USB
3.0 port.
● Ports on the rear panel:
– Two USB 3.0 ports
– One DB15 VGA port
– One RJ45 serial port
– One RJ45 management network port
● Built-in ports:
– Two SATA ports
NOTE
You are not advised to install the OS on the USB storage media.
FusionServer 1288H V7 Server
Technical White Paper 6 Specifications
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 55