• [MENU] key: It is used for activating the MENU, choose each MENU selection and confirm the parameter.
•
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this control to move
the scanning upwards.
•
key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN mode, press this
control to move the scanning downwards.
• [EXIT] key
Press to exit the Menu and functions. Press and hold the [EXIT] key to activate the one-touch search function.
• Numeric keypad
With these keys you can input the information or your selections on the radio. In tx mode, press the number keys to send a corresponding
DTMF code.
Programmed Key
It is possible to set different functions for [SK1], [SK2] keys. Method 1: In radio Menu – 48/49/50 PF1 Press/PF1 LongPre/ PF2 Press.
None No Function
Torch On/Off Quick switch torch
Power Select Quickly switch between high, low transmit power.
Scan On/Off Quickly switch scanning function on or off.
VOX On/Off Quickly switch on/off VOX function
Alarm on/off Quickly establishes an emergency call.
Radio on/off Quickly switch on or off the FM radio function.
To Next Page
Loading...