If you for some reason want to listen to the repeater's input frequency instead, press key momentarily and you'll reverse your transmit and
receive frequencies.
This is indicated in the LCD on the radio with an R in the top row, next to the + and - for the offset direction.
6.5 VOX
This function allows hands-free conversations: just speak in the direction of the microphone and the communication will be automatically
activated.
In standby mode, press [MENU] + 25. The screen will display “VOX Switch”.
Press [MENU] key to enter the function. Press the
/ keys to turn off/ turn on the VOX function
In standby mode, press [MENU] + 26. The screen will display “VOX Level”.
Press [MENU] key to enter the function. Press the
/ keys to select the VOX level (1-9), then press [MENU] key to confirm.
To return to the standby mode press [EXIT] key.
NOTE: level 1 is the least sensitive while level 9 is the most sensitive. When the radio is in Scan or FM Radio mode, the VOX is not enabled.
6.6 Dual Watch
In certain situations, the ability to monitor two channels at once can be a valuable asset. This can be achieved in one of two ways. You can
either have one receiver in your radio and flip-flop between two frequencies at a fixed interval (known as Dual Watch), or you can equip a radio
with two receivers (known as Dual Receive or Dual VFO). The former method is cheaper to implement and far more common than the latter.
The Radios features Dual Watch functionality (single receiver) with the ability to lock the transmit frequency to one of the two channels it
monitors.
Enabling or disabling Dual Watch mode
1. Press the [MENU] key to enter the menu.
2. Enter 3 8 on the numeric keypad to get to Dual Watch.
3. Press [MENU] key to select.
4. Use the
/ keys to Double Wait/ Signal Wait/ OFF.
5. Press the [MENU] key to confirm.
6. Press the [EXIT] key to exit the menu.
6.7 Stopwatch timer
In standby mode, press [MENU] + 5 7. The screen displays “STOP WATCH”.
To Next Page
Loading...