5.15 One touch frequency Search
(1) The radio will act as a receiver. Press and hold the key, and the screen will display “SEARCH SWEEK..."
(2) If the transmitter continues to transmit and the unit receives an effective frequency (the strongest and stable signal), the
received frequency will be displayed. If there is a CTCSS or DCS, the CTCSS or DCS value is displayed, and if there is no CTCSS
or DCS, NONE is displayed
(3) You can press the [MENU] key to save the Search frequency and CTCSS or DCS to the channel.
Note: During frequency Search, press the
key on the radio to switch between UHF or VHF bands.
5.16 Weather Radio/Scan Weather Channel
Your radio has a NOAA Weather Radio function, to enable the user to receive weather reports from designated NOAA stations. Your radio also
has a NOAA Weather Scan function, to enable the user to scan all 10 channels of the NOAA Weather Radio.
(1) To turn the NOAA Weather Scan on, press the [0SQL] key for 3 seconds,
icon appears. The radio will go to Weather band mode.
(2) Press and hold the
key for 3 seconds to start automatic scanning of all 10 channels and stop on active channels. Pressing and hold the
key for 3 seconds during a NOAA weather scan will stop the scan.
(3) After stopping NOAA weather scan, it is allowed to manually select the weather channel by press the
/ key.
(4) To exit the Weather Radio broadcast mode, press the [EXIT] key or [PTT] key.
Weather channel frequencies and names
Channel Number RX Frequency MHz Channel Number RX Frequency MHz
Wx -01 162.550 Wx -06 162.500
Wx -02 162.400 Wx -07 162.525
Wx -03 162.475 Wx -08 161.650
Wx -04 162.425 Wx -09 161.775
Wx -05 162.450 Wx -10 163.275
NOTE: Weather Channels Wx 1 Thru 10, Receive-only channels for NOAA and Canadian weather broadcasts. You cannot transmit on these
channels.
To Next Page
Loading...