Chapter6. Advanced Features
6.1 Working the menu system
6.1.1 Basic use
Using the menu with arrow keys
1. Press the [MENU] key to enter the menu.
2. Use the / keys to navigate between menu items.
3. Once you find the desired menu item, press [MENU] again to select that menu item.
4. Use the
/ keys to select the desired parameter.
5. When you've selected the parameter you want to set for a given menu item;
a. To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
b. To cancel your changes, press [EXIT] and it will reset that menu item and bring you out of the menu entirely.
6. To exit out of the menu at any time, press [EXIT] the key.
6.1.2 Using short-cuts
As you may have noticed if you looked at Appendix B, Menu definitions, every menu item has a numerical value associated with it. These
numbers can be used for direct access of any given menu item.
The menu is also organized in such a way that the ten most common functions are on top.
The parameters also have a number associated with them, see Appendix B, Menu definitions for details.
Using the menu with short-cuts
1. Press the [MENU] key to enter the menu.
2. Use the numerical keypad to enter the number of the menu item.
3. To enter the menu item, press the [MENU] key.
4. For entering the desired parameter you have two options:
a. Use the arrow keys as we did in the previous section; or
b. Use the numerical keypad to enter the numerical short-cut code.
5. And just as in the previous section;
a. To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
To Next Page
Loading...