2-16 Installation XT-50, XT-80, and XT-100 Amplifiers
RF Connectors
RF Input Connector J3
Refer to Figure 2-7 for the location of connector J3. This Type N (Female) Connector is the input for
the TWTA.
RF Sample Connector J4
Refer to Figure 2-7 for the location of connector J4. This Type N (Female) Connector is connected to a
probe in the output waveguide assembly of the TWTA.
RF Output Waveguide Flange J5
The RF Output flange is:
CPR-137G for C-Band or X-Band
CPR-112 for X-Band
WR-75 for Ku-Band
Details on connection to this waveguide flange were presented in the Waveguide Connection Section of
this chapter.
To Next Page
Loading...