Xilinx Kintex-7 FPGA KC705

KC705 Getting Started Guide www.xilinx.com 13
UG913 (v3.0.2) April 23, 2013
Introduction
Figure 1-6 shows the output display for the selections made in step 7.
The Web browser receives one packet of results at a time. This packet contain five
results:
• Read throughput (Gb/s)
• Write throughput (Gb/s)
• On-chip temperature (°C)
•On-chip V
CCINT
voltage (V)
•On-chip V
CCAUX
voltage (V)
JavaScript is used to convert these results into coordinates and update the graphs. The
graphs update every time a new data packet is received. The graph holds a maximum
of 12 data points at a time. After the maximum has been reached, the oldest data point
is dropped and the newest data point is added.
9. Repeat step 7 and step 8 to explore different VIDEO DEMO TESTS options by
changing the selections mentioned in step 7.
X-Ref Target - Figure 1-6
Figure 1-6: Output Video Display
UG913_c1_06_051612