Xilinx ML605

ML605 Hardware User Guide www.xilinx.com 11
UG534 (v1.9) February 26, 2019
Overview
• 16. Status LEDs
•Ethernet status
•FPGA INIT
•FPGA DONE
•System ACE CF Status
• 17. User I/O
• USER LED Group 1 - GPIO (8)
• USER LED Group 2 - directional (5)
• User pushbuttons - directional (5)
• CPU reset pushbutton
• User DIP switch - GPIO (8-pole)
• User SMA GPIO connectors (2)
• LCD character display (16 characters x 2 lines)
• 18. Switches
• Power on/off slide switch
• System ACE CF reset pushbutton
• System ACE CF bitstream image select DIP switch
• Configuration MODE DIP switch
• 19. VITA 57.1 FMC HPC Connector
• 20. VITA 57.1 FMC LPC Connector
• 21. Power Management
• PMBus voltage and current monitoring via TI power controller
• 22. System Monitor
• Configuration Options
• 3. 128 Mb Platform Flash XL
• 4. 32 MB Linear BPI Flash
• 5. System ACE CF and CompactFlash Connector
• 6. USB JTAG
Send Feedback