Xilinx ML605 - Block Diagram; Related Xilinx Documents

10 www.xilinx.com ML605 Hardware User Guide
UG534 (v1.9) February 26, 2019
Chapter 1: ML605 Evaluation Board
Features
The ML605 provides the following features:
• 1. Virtex-6 XC6VLX240T-1FFG1156 FPGA
• 2. 512 MB DDR3 Memory SODIMM
• 3. 128 Mb Platform Flash XL
• 4. 32 MB Linear BPI Flash
• 5. System ACE CF and CompactFlash Connector
• 6. USB JTAG
• 7. Clock Generation
• Fixed 200 MHz oscillator (differential)
• Socketed 2.5V oscillator (single-ended)
• SMA connectors (differential)
• SMA connectors for MGT clocking
• 8. Multi-Gigabit Transceivers (GTX MGTs)
• FMC - HPC connector
• FMC - LPC connector
•SMA
•PCIe
• SFP Module connector
• Ethernet PHY SGMII interface
• 9. PCI Express Endpoint Connectivity
• Gen1 8-lane (x8)
• Gen2 4-lane (x4)
• 10. SFP Module Connector
• 11. 10/100/1000 Tri-Speed Ethernet PHY
• 12. USB-to-UART Bridge
• 13. USB Controller
• 14. DVI Codec
• 15. IIC Bus
•IIC EEPROM - 1KB
• DDR3 SODIMM socket
•DVI CODEC
• DVI connector
• FMC HPC connector
• FMC LPC connector
• SFP module connector
Send Feedback