Xilinx Zynq UltraScale+ User Manual

Zynq UltraScale+ VCU TRD User Guide 83
UG1250 (v2019.1) May 29, 2019 www.xilinx.com
Appendix A: Input Configuration File
Audio Configuration: Starting point of audio configuration
Audio Enable: Enable or disable audio in the pipeline
Options: True, False
Audio Format: Format of the audio
Options: S24_32LE
Sampling Rate: Sets audio sampling rate
Options: 48000
Num of Channel: Number of audio channels
Options: 2
Volume: Sets the volume level
Options: 0.0-10.0
Source: Required audio source
Options: HDMI, SDI and I2S
Renderer: Required audio sink
Options: HDMI, SDI I2S and DP
Exit: Indicates to the application that audio configuration is finished
Trace Configuration: Starting point of trace configuration
FPS Info: Displays fps info on the console
Options: True, False
APM Info: Displays the apm counter number on the console
Options: True, False
Pipeline Info: Displays pipeline info on the console
Options: True, False
Exit: Tells the application that trace configuration is finished
Send Feedback

Xilinx Zynq UltraScale+ Specifications

General

Manufacturer	Xilinx
Model	Zynq UltraScale+
Category	SoC
Processor Cores	Quad-core ARM Cortex-A53, Dual-core ARM Cortex-R5
FPGA Fabric	UltraScale+ FPGA
Memory Interfaces	DDR4, DDR3, LPDDR3, LPDDR4
Connectivity	Gigabit Ethernet, USB 3.0, SATA, PCIe
Video Codecs	H.264
Power Consumption	Varies depending on specific device configuration and usage
Operating Temperature	Commercial: 0°C to +85°C, Industrial: -40°C to +100°C