Xilinx Zynq UltraScale+ User Manual

Zynq UltraScale+ VCU TRD User Guide 2
UG1250 (v2019.1) May 29, 2019 www.xilinx.com
Revision History
The following table shows the revision history for this document.
Date Version Revision
05/29/2019 2019.1 Updated hardware and software tools for Vivado Design Suite 2019.1 and
Petalinux-2019.1. This release has all the designs supported in 2018.3 and the
following new designs:
• SCD feature in multi-stream design
• Multi-stream audio support
• PCIe based file transcoding
• PLDDR in HDMI pipeline
• SDI-RX and SDI-TX designs with 4:2:2 10 bit support
• SDI RX/TX design with audio support
12/05/2018 2018.3 Updated for hardware and software tools for Vivado Design Suite 2018.3. Updated for
HDMI video display, HDMI video capture and HDMI display with audio, 10G HDMI
video capture and HDMI display, 10G HDMI video capture and HDMI display with
SDSoC support, and SDI video display designs. Updated with complete VCU TRD
design details and with design components for the audio and streaming feature.
Added 1080p30 multi-stream support.
07/27/2018 2018.2 Updated for hardware and software tools for Vivado Design Suite 2018.2. Updated
Figure 1-3, Figure 3-2, Figure 3-3, Figure 3-9, Figure 3-11, Figure 5-1, and Figure 5-6.
06/29/2018 2018.1 Updated for hardware and software tools for Vivado Design Suite 2018.1.
02/15/2018 2017.4 Updated for hardware and software tools for Vivado Design Suite 2017.4. Updated
Figure 3-16 and Figure 3-17. Removed GStreamer Interface Library Description.
Limited release.
12/20/2017 2017.3 Updated for Vivado Design Suite 2017.3. Video support is upgraded from 4KP30 to
4KP60. Added multi-stream encode/decode support, pipelined MIPI video input, and
the HDMI TX video display pipeline. Updated Exported APIs. Limited release.
12/01/2017 2017.2 Initial Xilinx release. Limited release.
Send Feedback

Xilinx Zynq UltraScale+ Specifications

General

Manufacturer	Xilinx
Model	Zynq UltraScale+
Category	SoC
Processor Cores	Quad-core ARM Cortex-A53, Dual-core ARM Cortex-R5
FPGA Fabric	UltraScale+ FPGA
Memory Interfaces	DDR4, DDR3, LPDDR3, LPDDR4
Connectivity	Gigabit Ethernet, USB 3.0, SATA, PCIe
Video Codecs	H.264
Power Consumption	Varies depending on specific device configuration and usage
Operating Temperature	Commercial: 0°C to +85°C, Industrial: -40°C to +100°C