6
2. Installation and wiring
2-1. Installation
2-1-1. Dimension
⚫ DP3C-305, DP3C-705, DP3C-808 Unit: mm
2-1-2. Installation environment
The reliable working temperature of the driver is usually within 60℃, and the working temperature of the motor is
within 80℃. To ensure that the driver works within the reliable working temperature range, the driver shall be
installed in an electric cabinet with good ventilation and proper protection. If necessary, a fan shall be installed
near the driver to dissipate heat forcibly, so as to avoid using in the occasions of dust, oil mist, corrosive gas, too
high humidity and strong vibration.
To Next Page
Loading...
Need help?
General
