7
2-2. Wiring
2-2-1. Typical wiring diagram
2-2-2. Wiring caution
(1) Please wiring according to the terminal voltage and polarity to prevent equipment damage and personal injury.
The DC driver power supply cannot be reversed
(2) If one power supply supplies multiple drives, parallel connection shall be adopted at the power supply side,
and chain connection from one to another is not allowed.
(3) It is strictly forbidden to connect the conductor head with tin to the wiring terminal, otherwise the terminal
may be overheated and damaged due to the increase of contact resistance.
(4) The terminal head shall not be exposed outside the terminal to prevent accidental short circuit from damaging
the driver.
To Next Page
Loading...
