7-3.Auxiliary parameter list
Function code Explanation
F0-00 Clear the alarm
F0-01 Restore to out of factory settings
F0-02 clear the position offset
F0-07 Panel inertia identification
F0-08 Panel external command self-tuning
F0-09 Panel internal command self-tuning
F0-10 Panel vibration suppression 1
F0-11 Panel vibration suppression 2
F0-12 Panel vibration suppression (fast FFT)
F1-00 Jog operation
F1-01 Test run
F1-02 Current Sampling Zero-correction
F1-05 software enable
F1-06 Absolute encoder position clear
F2-09 Set segment no. through communication
117
To Next Page
Loading...
