14
CALLER
10
Caller
ID
will display the incoming call information
on
the
LCD
of
your extension
sets.
For
this feature
to
work,
both
the cell phone and your extension telephones must
support caller
10.
ONaTE:
• This feature may
not
be supported by all cell phones.
• Most cell phones only provide the caller
number
and
not
the
name.
CALL
WAITING
The
XLink will generate a call waiting tone
to
alert you
to
another incoming call on any
of
the 3 lines. When you hear a
call
waiting tone,
press
the
FLASH
(or
CALL
WAITING
or
LINK
etc.)
button
on the extension telephone. This will connect
the
second caller.
Pressing
the
FLASH
key will then toggle
through
all active calls.
ONaTE:
• This feature may
not
be supported by all cell phones.
VOICE
DIALING
If
your cell phone supports voice dialing then the XLink may be able
to
access
this
feature. The following steps may allow you
to
voice dial from extension telephones:
Pick
up
an extension telephone. Listen for dial tone.
2 OPTIONAL: Select Line:OJI
FLASH
Io
r
[]l
FLASH
lor[I]1
FLASH
I
To Next Page
Loading...
Need help?
General
