Replacing the XPLORA Wristband
1. Slide the strap at the joint
slightly aside so that you can
see the spring bar.
2. Slide the spring bar with
a suitable tool together, around
the strap from the joint to
release.
3. Take the spring bar out
from the strap and put it in
the new strap inside.
4. Put the new strap with
the spring bar on one side
into the joint of the XPLORA.
5. Press the spring bar
together around the strap
as well as the other side
to connect in the joint.
1
2 4 5
3
8
To Next Page
Loading...
Need help?
General
