Need help?Do you have a question about the XPLORA CARE and is the answer not in the manual?
General| Resolution | 240 x 240 pixels |
|---|---|
| Water Resistance | IP67 |
| GPS | Yes |
| SOS Button | Yes |
| Battery Life | Up to 3 days |
| Connectivity | Bluetooth, Wi-Fi |
| Compatibility | Android, iOS |
Download and install the XPLORA Care app from the App Store or Google Play Store.
Enter your mobile number, wait for a code via SMS, and create a user account and password.
Enter the XPLORA's phone number and the 4-digit code from the watch into the app.
Connect the micro USB cable to the cradle and place the XPLORA on it, aligning metal contacts.
Press and hold the button on the right side for a few seconds to turn the device on.
Press and hold the right button for 5-10 seconds; a progress bar indicates shutdown.
Swipe to the phone icon, select contact, and tap to call.
Pressing SOS for 4s contacts primary guardian, sending location and calling.
Tap the telephone icon when the watch rings to answer.
Swipe to 'Send Location', tap to send current location to XPLORA app and guardians.
Find and download the XPLORA Care app from the Google Play Store or App Store.
Enter your mobile number, receive a 4-digit code via SMS, and enter it in the app.
Choose an account name and password (at least 6 characters), then confirm and register.
Ensure XPLORA is on, enter its phone number in the app, and input the 4-digit code received on the watch.
Set safety zones with a minimum radius of 500m and receive push notifications for entry/exit.
Save one-time or repeat alarms for appointments or medication.
To Next Page
