11
COILS
CONFIGURATION
PROGRAMS
SELECT
OPTION
PINPOINTER
OPTION
PINPOINTER
REMOVE
REMOVE
SELECT
PINPOINTER
RESEARCH
Find your pinpointer within a radius of 25 meters, even if switched o and
missing after several weeks.
Choose , select and .
The pinpointer will start sounding with a ashing LED.
Press the pinpointer button and return to the search mode with .
PINPOINTER MI-6
When connected the MI-6 pinpointer transmits its audio signal directly
to the DEUS, a new menu will now be available with extended functions.
Choose .
Press and select .
Turn on the MI-6 , then hold the button down for 8 seconds.
Once paired the MI-6 will operate with the DEUS.
When pairing, the MI-6 automatically switches to program 7 (ORX / DEUS). This program will
only work with the ORX. Program 7 will not generate any sound or vibration.
Pairing the MI-6 to the ORX
Target zoom screen.
Program.
Access to:
SENS - TONE - AUDIO...
MI-6 battery condition.
Recover a lost MI-6
MI-6 active display screen
Choose select and naly press .
To use the MI-6 without the ORX, select programs 1 to 6 on the MI-6
menu. To change program: Switch MI-6 on - press the button for 5 seconds, a
melody indicates that you have entered the program selection mode, press to
correspond with the desired program number (eg press 2 times for program 2).
After 2 seconds the melody indicates the MI-6 has returned to the search mode.
Un pair the MI-6 from the ORX
To Next Page
Loading...