02
Congratulations on the purchase of your ORX and welcome to the world of research and
exploration.
You have invested in a high-tech metal detector capable of exceptional performance.
The ORX has been designed and manufactured in France.
The ORX
is innovative in terms of metal detector design as it oers an unique system based on
dierent wireless elements communicating via a digital radio link. In this new design the coil and
remote control have been made independent of each other through the integration of very
compact high-capacity lithium batteries.
An ultra-miniature electronic circuit, incorporated in the search coil, digitises and analyses
the signals. The signal is processed at the source and not conveyed via a wire link, which
greatly improves data quality.
Incorporating components from leading-edge technologies such as scientic instrumentation,
has enabled us to produce a powerful, rapid, lightweight, compact and fully controllable digital
detector.
Whether you are an experienced user or a beginner, The ORX lets you decide whether
or not to modify any of its remote control settings. Powerful pre-congured factory programs
enable all users to get started immediately, while expert detectorists can choose more
advanced parameters via the intuitive interface.
Lastly, the new patented XP stem has the combined advantages of an S-shaped stem and a
straight telescopic stem. It enables you to deploy or fold away the device in just a few seconds,
and to change the coil in an instant.
So now you’re ready for a new adventure!
TECHNICAL INTRODUCTION
To Next Page
Loading...