Xplore ORX - Factory Programs; #1 - GOLD; #2 - FINE GOLD; #3 - COIN FAST

04
SENS
REACTIVITY
DISC IAR
MENU
FREQUENCY
1- GOLD
27800 HZ
GND LEVEL
GND BALANCE GND MEASURE
TARGET ID
IRON PROBABILITY
1- GOLD
27800 HZ
GND LEVEL
GND BALANCE GND MEASURE
KHZ
Change
programs
Control settings
Conguration / Programs / coils
Decrease the ground eect corrections
Decrease values
USB connection for charging
or updating the software
Increase the ground eect corrections
Increase values
3.5 plug: audio output jack
Battery level (displays alternately)
Coil / Remote control / MI-6
Name of active program
Change program with
Mineralisation strength
The actual level of ground eect
corrections (use phase adjustment)
from 60 to 99
Detection Frequency used
Ground mineralisation index
(phase measured constantly
for information)
Target ID
Battery level
Coil / Remote control / MI-6
Probability level of iron
Return to the main menu
To scroll through the menu
Frequency shift
Quick press : access to MENU
DISCRI - SENS - FREQ ...
Press 2 sec: to send the Target ID
to GO TERRAIN apps
When a target is detected
- Example of secondairy screen :
Quick press: Automatic capture of the ground
eects (Ground Grab)
Press 2 sec : PINPOINT Mode
ON/OFF
FACTORY PROGRAMS
REMOTE CONTROL
# 1 - GOLD
# 2 - FINE GOLD
# 3 - COIN FAST
# 4 - COIND DEEP
#5 - USER
# 6 - USER
For low / average mineralisation, good sensitivity to medium and large sized Gold.
For heavy mineralisation / with good sensitivity to small and medium sized Gold.
For coins and all types of targets good performance on mineralised or contaminated ground.
For coins and all types of targets good performance on low mineralised / uncontaminated ground.
Customisable GOLD or COIN program.
Customisable GOLD or COIN program.
The GOLD and COIN programs use dierent methods of signal processing.