5
CHASSIS PREPARATION
VIDEO TECH TIP
▶
CHASSIS PREPARATION
CA
At the beginning of each section is an exploded view of the parts to be assembled. There is also a list of all
the parts and part numbers that are related to the assembly of that section.
The part descriptions are color-coded to make it easier for you to identify the source of a part. Here are
what the different colors mean:
STYLE A - indicates parts that are included in the bag marked for the section.
STYLE B - indicates parts that are included in the box.
STYLE C - indicates parts that are already assembled from previous steps.
COLOR INDICATIONS
301011
304901
305134
BUILD TIPS & NOTES
XRAY offers wide range of optional tuning parts
which are listed in a table like this. Please refer
to the exploded view of each main section to verify
which part is included in the kit while all other parts
are available only as an optional part and must be
purchased separately.
SAMPLE OF OPTIONAL PARTS
#30XXXX TYPE1 OPTION 1
#30XXXX TYPE1 OPTION 2
#30XXXX TYPE1 INCLUDED
#30XXXX TYPE1 OPTION 3
CA
To protect and seal edges of graphite parts, sand edges smooth and then apply CA glue.
Do this for: chassis edges and countersunk holes.
Apply only a bit of CA glue in the countersunk holes.
VIDEO TECH TIP
▶
When a QR CODE is found in the instruction manual,
scan the code to be directed to an online video that
explains that feature or adjustment in more detail.
Make sure to watch all of the instructional videos to
get the most performance out of your car.
Alexander Hagberg (Factory Driver)
To Next Page
Loading...
Need help?
General
