15
Rev. 1.0 30.01.2020
The instrument is in measure mode.
The instrument is in calibration (automatic or manual in relation to
the user's choice).
The user is in the setup mode.
The configuration menus can concern the characteristics of the
parameters or the general setting of the instrument.
Setup Menu
• In measure mode, press the key to enter SETUP mode, select the parameter you want to edit
by using the directional keys and confirming with .
pH SETTINGS COND SETTINGS PH SETTINGS
ORP SETTINGS TDS SETTINGS ORP SETTINGS
SETTINGS SETTINGS COND SETTINGS
TDS SETTINGS
SETTINGS
• Within the selected menu, move between the different programs using the directional buttons and
press the button to access the submenu you want to edit.
• Using the keys and choose the desired option or change the numerical value and confirm
with .