Xterra FS3.5 - Hardware Step 3 Components; Hardware Step 4 Components; Required Assembly Tools

4
FS3.5 Elliptical
#115. 13 & 14 mm Wrench (1 pc) #116. 12 mm Wrench (1 pc)
#118. Combination 5mm Allen Wrench
& Phillips Head Screw Driver (1 pc)
Assembly Tools
#87. Ø3.5 x 12mm
Sheet Metal Screw
(8 pcs)
#76. 5/16” x 1-3/4”
Hex Head Bolt
(6 pcs)
#91. 5/16” x 7T
Nyloc Nut
(6 pcs)
Hardware Step 4
#102. Ø8.7 x 20 x 1.5T
Flat Washer
(2 pcs)
#74. 5/16” x 15mm
Hex Head Bolt
(2 pcs)
Hardware Step 3
#113. 5/16” x 23 x 1.5T
Curved Washer
(4 pcs)